End and Shell Evaluation | Can making | Canneed Vietnam | Can need Vietnam | Pitesco Vietnam

AEPS-100 Automatic End Profile Systems is used to test end sizes. Excellent performance, 
adopt optical testing technology, accurately measures end sizes.
Inaccurate end sizes lead to bad quality double seams, such ascut seam, head cover, fake seam.
It is hard to measure all end profile datas without AEPS-100.
Old destructive testing ways take long time, inaccurate, and different handlers get different results.
AEPS-100 adopt optical testing technology, accurately measures all the end sizes.

The CanNeed DER-400 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.

The Canneed “CTG-310 Coating Thickness Gauge” provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans, and also tinplate. 

The system provides the following benefits to the Can and End manufacturer: 

The CanNeed CND-TRK-300 Oven Temperature Tracker is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.

The CanNeed "PTT-300 Pop & Tear Tester" was developed for testing different kinds of easy open ends.
Applicable to 7 different types of ends: RP / SOT / EO / OVAL / FSE / SNAP and ALUFIX.
Adopted 5 different testing modes: RP / SOT / EO / OVAL and SNAP. 
Operators just need to hook the ring and press "test" button, then the PTT-300 will do the test automatically. During the testing process, the microprocessor will monitor and record the max. Pop and Tear force. With different sizes of the clamps, it is able to test different sizes of ends.

The CanNeed "EMD-400 End Measure Desk" was developed according to the long-term practical experience, it can be used next to the production line or in the laboratory.
The EMD-400 measures the End Curl Height, Curl Diameter, End Curl Width and Countersink. It is equipped with Mitutoyo digital indicator. If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.

The ELT-100 applies high pressure air to the product side of and end until the end fails. Leaking spots are made visible by revealing bubbles in the water bath. The failure of an end occurs either when the end buckles or when it starts leaking, leakage is generally caused by faulty scores or rivets.

The "Canneed LSS-100 Low Speed Saw" is for cut the End rivet to observe and evaluate the rivet profile images of ends. It work with the "Canneed VRM 3A Video Rivet monitor".
The end is cut through the rivet by the LSS-100 Low Speed Saw, the rivet is positioned manually in front of the camera. The rivet profile images display on the display.